Topic on VisualEditor/Feedback

Whatamidoing (WMF) (talkcontribs)

Here's another thread about the special character inserter; the other one has gotten kind of long. Some questions to consider:

  • Do you normally use a character inserter? The one in your computer, or the one in the Wikipedia/MediaWiki editor?
  • Which character sets are useful to you? Should it include all 18 of the character sets provided in the wikitext editor's newer toolbar at the English Wikipedia, the 10 present in the older editor toolbar, or some other combination of character sets?
  • How many special characters would you like to see at one time?
    • Should there be a "priority" or "favorites" section for the 10 or 12 characters that most editors need most often? Is it okay if you need an extra click to go beyond the limited priority set?
    • How should the sections be split up? Should they be nested? Ordered?
    • How should the sections be navigated? Should there be a drop-down? A nested menu?
  • The wikitext editor has never included many symbols and characters, like ℗ and ♀. Do you find that you need these missing characters? If the character inserter in VisualEditor includes hundreds or thousands of special characters, will it be overwhelming? How will you find the character you want? What should be done for users without enough space to display more than a few dozen characters?
  • Should the character inserter be statically available until dismissed? Should it hover near the mouse? Should it go away on every selection or 10 seconds after a selection with no subsequent ones?
  • Some people believe that the toolbar already has too many options—how would you simplify it?
Nicereddy (talkcontribs)
  • Change the "<" to an "X" - I would change the current "<" button to an "X" and move it to the top right. The "<" doesn't make sense as it's not inherently attached to any sidebar, so the arrow points at nothing in particular. This is also a problem I have with the Gallery dialog.
  • Moving the dialog like a window - The dialog should be movable by the user as though it was a separate window (e.g. grab the header and drag it elsewhere in the browser.), rather than attached to the location of your cursor in the edit window.
    • To add on to this, I think all of the Insert dialogs should have this functionality, I oftentimes want to look at the picture I'm captioning in the gallery or the text which is located nearby it. However, I can't do this without closing the dialog and then opening it back up again.
  • The dialog is too vertically lengthy - Limit the height of the dialog box vertically and add a scroll bar. The entire box should be visible when it's first opened. Currently, the bar is very long and can go all the way to the bottom of the article in some cases.
  • Change the sections into tabs - It shouldn't look like Wikipedia's section headers, it should be a tabbed interface a la a browser. This would also help with the aforementioned height of the dialog.
  • Add a search bar to the dialog - I'm not sure how this would be done from a technological perspective, but I would assume it's possible to add "tags" of some sort to each symbol. For example, á and other variations of "a" or "A" with accents would be tagged with "A". This way, you can search for a letter (e.g. "a", "c", "e", "i", etc.) and it will bring up all variations of that letter. For symbols with actual titles, like the tilde (~), these would be tagged with their actual name. The tags wouldn't be visible to the user, they'd simply allow symbols to be searched more easily. This would be especially useful if a large amount of symbols were added to the dialog.
  • Organize the buttons into a proper, aligned grid - Currently, the horizontal width of each button containing a symbol differs greatly. This makes it a lot harder to search through, as your eye randomly skims through the unorganized list of symbols. Preferably, every symbol would be contained inside a button with the same horizontal size, all lined up similarly for ease of navigation for editors.

Hopefully these are helpful, I look forward to future progress!

Jdforrester (WMF) (talkcontribs)

Thanks for this, it's really helpful – some replies.

Change the "<" to an "X"

As you say, this is a consistent design for all inspectors; I agree that it's worth looking at this again.

Moving the dialog like a window

This is quite a lot of work (and yes, if we wrote this functionality it would also be something we build for all inspectors and dialogs). Would this be more valuable than (say) TheDJ's suggestion of it appearing as a hovering block at the bottom of the window (in the same way but the opposite end of the view to the toolbar)?

The dialog is too vertically lengthy

We can very easily make it only sized to the window (maybe with a minimum height, like we do for dialogs). Should the page scroll down so that you get to see enough of the dialog, too? Right now we don't do this for inspectors, but it might make them a bit easier to use when your cursor is at the bottom of the page.

Change the sections into tabs

The problem here is that the sections are defined by local communities; what would we do if there were 10 sections? 20? 50?

Add a search bar to the dialog

This could turn what should be a quite simple and quick to use interface into something that's very "heavy", and I think it'd only be useful for a minority of characters, and only to some users who already know that they're looking for an "a"-related character (for example, would you expect "α", "א", "æ" and "ɐ" to show up when you typed in "a"?). Would it be better if we had some way of organising the characters so that all the As were clustered together in each section, like was suggested here?

Organize the buttons into a proper, aligned grid

This could be very helpful, yes – I'd note that the WikiEditor's special character panel uses this approach, to its credit. Do you think that we should hard-code a maximum width and show buttons with labels centred regardless of their actual width, or should the width of the buttons on screen alter as the widest character currently shown gets wider or narrower? I think the first option is probably better, but it's not a great choice to need to make. Note that users' browsers/system/font selection (amongst other issues) can make it unpredictable how wide this will be (and indeed which character is widest), which may be a little confusing.

Nicereddy (talkcontribs)

Thanks for replying!

Would this be more valuable than (say) TheDJ's suggestion of it appearing as a hovering block at the bottom of the window

I would definitely prefer the hovering block to its current state, especially if it had a minimize feature that saved its contents but kept it in a "dock"-esque footer-bar. Though, generally I do believe the ability to control it myself would be preferable over having it locked in anywhere, but if it's too much work that's perfectly understandable.

Should the page scroll down so that you get to see enough of the dialog, too?

I don't think it should. Most users probably wouldn't want the editor to move their viewing space without consent or warning, and this would probably make for a bad user experience.

I believe you're referring to the fact that if the user were to be selecting text in (for example) the bottom 200 pixels of the screen, the inspector wouldn't have enough room to open and part of it would be cut off? If I'm misunderstanding please correct me, but the "right-click" dialog already handles this problem quite well. When you right-click near the top of the screen the menu opens downward, but if you right-click near the bottom it opens upwards in order to fit itself into the given area. Making it dynamically able to open above/below the cursor would likely be preferable. Of course, the dock functionality mentioned above would fix this if implemented, and make this issue essentially irrelevant.

what would we do if there were 10 sections? 20? 50?

This kind of contradicts your next point (with regards to the search box) about it being a quick-to-use dialog. If it's capable of reaching 20+ sections, there's probably something wrong with the dialog or its purpose. That would mean hundreds of potential choices in the dialog and there's no good way of organizing that (without a search box ;) ). Currently, it's so large it's cumbersome to look through and my eyes don't scan through it in any real order because it's so condensed. These problems may be fixed by the improved grid but, assuming they aren't, perhaps we could settle at both tabs and sections? Max it to a reasonable number of tabs, e.g. 6, and then allow sections to serve as subheaders for each tab.

Either way, I think collapsible sections will be necessary if you want the dialog to be reasonably usable.

This could turn what should be a quite simple and quick to use interface into something that's very "heavy", and I think it'd only be useful for a minority of characters, and only to some users who already know that they're looking for an "a"-related character (for example, would you expect "α", "א", "æ" and "ɐ" to show up when you typed in "a"?).

With regards to its simplicity and speed, I think this would make it more complicated at the back-end, but the user-facing interface would be much quicker and easier to find exactly what you're looking for. The simplicity may be complicated a bit by a search bar, but we're talking about a huge, difficult-to-organize list of characters. I wouldn't imagine most users would immediately think "simple" upon viewing it.

And while I can understand that users may not understand the features of the search bar immediately, a simple tutorial or note would make it evident and understandable reasonably quickly.

Would it be better if we had some way of organizing the characters so that all the As were clustered together in each section

This would definitely be a good way of organizing it, but again I feel like everything would just be smoother with the Search dialog.

Do you think that we should hard-code a maximum width and show buttons with labels centred regardless of their actual width

I think the approach which uses a maximum size for each panel in the grid is preferable, especially since issues could come up if there was, for whatever reason, a character which was especially long or tall. That character would cause all of the buttons to become that same size and create a really odd-looking interface, especially if the buttons weren't squares.

Note that users' browsers/system/font selection (amongst other issues) can make it unpredictable how wide this will be (and indeed which character is widest), which may be a little confusing.

I may be completely wrong here, but is it not possible to override the user's font selection for this specific dialog? That way all users would see the same size/type of font in the Special Characters window? Obviously not the best way of solving the issue, assuming it's even possible, but its the only I could think of.

Cheers,

Salix alba (talkcontribs)

Do you normally use a character inserter? The one in your computer, or the one in the Wikipedia/MediaWiki editor?

Yep. I'd normally use Extension:CharInsert gadget first as its most convenient, I like the way it has a <select> drop down as I can quickly go to the set of chars I want and does not take much screen space. I find then the wikitext character inserter has a bit too much scrolling involved and is greedy in screen space. If neither of the two has the character i want I'll use my Mac's Character Viewer, I've done some work on the unicode pages and sometimes need exotic symbols.

Which character sets are useful to you? Should it include all 18 of the character sets provided in the wikitext editor's newer toolbar at the English Wikipedia, the 10 present in the older editor toolbar, or some other combination of character sets?

I tend to use the maths symbols and greek letters. For maths articles I need a more extensive range of maths symbols than is provided by VE. The set provided by CharInsert has most things I'm likely to use: − × ÷ ⋅ ° ∗ ∘ ± ∓ ≤ ≥ ≠ ≡ ≅ ≜ ≝ ≐ ≃ ≈ ⊕ ⊗ ⇐ ⇔ ⇒ ∞ ← ↔ → ≪ ≫ ∝ √ ∤ ≀ ◅ ▻ ⋉ ⋊ ⋈ ∴ ∵ ↦ ¬ ∧ ∨ ⊻ ∀ ∃ ∈ ∉ ∋ ⊆ ⊈ ⊊ ⊂ ⊄ ⊇ ⊉ ⊋ ⊃ ⊅ ∪ ∩ ∑ ∏ ∐ ′ ∫ ∬ ∭ ∮ ∇ ∂ ∆ ∅ ℂ ℍ ℕ ℙ ℚ ℝ ℤ ℵ ⌊ ⌋ ⌈ ⌉ ⊤ ⊥ ⊢ ⊣ ⊧ □ ∠ ⟨ ⟩ {{frac}} &nbsp; &minus; <math></math> {{math}}. I need all the upper and lower case greek letters. I normally only edit in English so fancy accent characters are of little use to me.

How should the sections be navigated? Should there be a drop-down? A nested menu?

The way Extension:CharInsert works on en wikipedia is about ideal,

A simple drop-down and a set of characters, a minimum of styling, surrounding boxes or buttons are just distractions. This gives a high density of characters using minimal screen space.

How many special characters would you like to see at one time?

Lots, probably 70 at a time, I need all upper and lower case greek letters. Not bothered by accents on them.

Should there be a "priority" or "favorites" section for the 10 or 12 characters.

Possibly, would I need to set this up?

The wikitext editor has never included many symbols and characters, like ℗ and ♀. Do you find that you need these missing characters?

Sometimes, if it very exotic I may use the unicode escape sequence &#x24C5; to give
Different users are likely to want very different ranges of characters, how about making it possible to add a particular unicode block to the set of possible sets. Say for example I want to add a page about a Russian mathematician like [[en:Vladimir Arnold]]. Then I want to add Cyrillic script. Even on en.wikipedia I guess some users will want most scripts for adding native names.
Jdforrester (WMF) (talkcontribs)

Thanks! Some replies and queries in-line:

I find then the wikitext character inserter has a bit too much scrolling involved and is greedy in screen space.

Yeah, this was something we were particularly keen to avoid repeating, though I feel we've yet to find a design that is better and yet meets the other requirements.

Should there be a "priority" or "favorites" section for the 10 or 12 characters.
Possibly, would I need to set this up?

I was imagining a "commonly-used" section that the tool defaults to displaying, rather than a per-user set of favourites (though if there's demand for it we could do the latter too, at some point).

Sometimes, if it very exotic I may use the unicode escape sequence to give Ⓟ

Unicode currently has over 100,000 characters defined; I think trying to have a tool that displays even "most" of them is probably unnecessary. Maybe an advanced button that can insert a character by Unicode code (so, in your case, you'd enter "24C5")?

Nicereddy (talkcontribs)
I was imagining a "commonly-used" section that the tool defaults to displaying, rather than a per-user set of favourites (though if there's demand for it we could do the latter too, at some point).

I would think most editors will request a personalized favorites section, as different editors may prioritize specific characters over others. An editor who primarily edits pages about math would likely want different "favorites" than someone interested in famous Spaniards or Russians.

TheDJ (talkcontribs)
  • The most basic set é ü etc i do straight from the keyboard.
  • The more complex but oft used chars, I do from MediaWiki:Edittools (JS version of en.wp)
  • I NEVER use the Special characters drop down in WikiEditor. (I think we should do some analytics gathering on that usage there btw)
  • Since Mac OS 10.9 I use the OS version, because: It has a helpful keyboard shortcut that works OS wide now. Very nice categories, search and variants.
  • Ideally, it should have like 6 categories of chars that you might often use on that wiki and ability to lookup and add other categories to your profile.
  • Per category I would expect max 25 chars, multiline
  • I would expect a fixed positioned footer (in view, consistently accessible, but out of the way) or a dock able floating panel or something the like.
  • I would expect it to be available until dismissed. Auto disappearing is nice in theory, but dismissing after 2 secs is too quick for multiple actions and dismissing after 10 secs would probably be too 'unexpected' for users.
Jdforrester (WMF) (talkcontribs)

Thanks.

I NEVER use the Special characters drop down in WikiEditor.

We've heard that from a number of people, which confirms our suspicions that EditTools (which was meant to be switched off when the WikiEditor special character inserter was rolled out, but never got axed) serves the needs of most users, particularly in terms of quick-and-easy UX.

(I think we should do some analytics gathering on that usage there btw)

Hmm, yeah; patches welcome. ;-)

Since Mac OS 10.9 I use the OS version, because: It has a helpful keyboard shortcut that works OS wide now. Very nice categories, search and variants. … Ideally, it should have like 6 categories of chars that you might often use on that wiki and ability to lookup and add other categories to your profile. … Per category I would expect max 25 chars, multiline

Mac OS X's native character inserter has 11 top-level categories, and yet misses a bunch of characters insertable in WikiEditor – IPA, Cyrillic, Arabic, Hebrew, … – and the "arrows" category has (at rough count) 300 characters alone. I don't think we'd want all of these, but drawing the line at 25 might be hard. :-) There are 20 variants of "A" in the Latin group, and another 27 of "A" in the Latin extended group, for example.

I would expect a fixed positioned footer (in view, consistently accessible, but out of the way) or a dock able floating panel or something the like. I would expect it to be available until dismissed. Auto disappearing is nice in theory, but dismissing after 2 secs is too quick for multiple actions and dismissing after 10 secs would probably be too 'unexpected' for users.

Perhaps a pop-out panel that disappears on each use, or can dock down to the bottom of the page to be persistent?

TheDJ (talkcontribs)

disappearing after each use, prevents you from inserting multiple characters in sequence (not that i personally use that feature, but some folks do)

Nnemo (talkcontribs)

James, you need to play more with the character palette of Mac OS X.

In my Mac OS X character palette, I have dozens of top-level categories of characters. One of them is phonetic alphabet, there are also cyrillic, arabic, hebrew…

Whatamidoing (WMF) (talkcontribs)

Perhaps I need to upgrade to the latest OS. I've been unable to find these characters in the character palette (which are combinations; all the pieces are there, but not the assembled units):

k̚ t̪ d̪ s̺ s̻ θ̼ s̬ n̥ ŋ̊ a̤ a̰ β̞ r̝ e̘ e̙ u̟ i̠ ɪ̈ e̽ ɔ̹ ɔ̜ n̩ ə̆ ə̯ ə̃ ȷ̃ z̴ ə̋ ə́ ə̄ ə̀ ə̏ ə̌ ə̂ ə᷄ ə᷅ ə᷇ ə᷆ ə᷈ ə᷉ t͡ʃ d͡ʒ t͜ɬ k͈ s͎


and I have only ten top-level palettes: Arrows, Parentheses, Punctuation, Currency Symbols, Pictographs, Bullets/Stars, Math Symbols, Letterlike Symbols, Emoji, and Latin.

Nnemo (talkcontribs)

…Or you need to play with the System Prefs. Even on my good old Snow Leopard, I have many exotic categories in my Character Palette.

Whatamidoing (WMF) (talkcontribs)

It can be changed in the Special Characters tool itself (instructions here for official http://support.apple.com/kb/PH10758 and here if you want screenshots: http://dailymactips.com/2012/11/02/insert-special-characters-and-symbols-into-your-mac-os-x-documents/ )

However, even after adding the phonetic alphabet section, I still can't find these letters. Nnemo, can you search for (k with a double vertical line below) in yours, and tell me whether you find that exact one? I only get the pieces (the k and the ͈ separately).

Nnemo (talkcontribs)

There is a keyboard equivalent for the Character Palette of Mac OS X now ? What is it ? I am egoistically interested. :-)

Whatamidoing (WMF) (talkcontribs)

Nnemo, If I'm thinking of the right thing, it's only for common Latin letters. Press and hold the letter 'a' for about two seconds, and see if a little menu with eight variations on 'a' appears. It only seems to work on "common" letters. I get nothing by holding down 'k', for example.

It works in 10.8, but I don't know if it works in 10.6 or 10.7.

Nnemo (talkcontribs)

Ah if it's this feature, I know it. I turned it off because I prefer the repeatttttttttttt (there is a trick to turn the feature off). This feature came after Mac OS X 10.6, it is one of those imports from iOS. Thank you anyway, but James seems to be speaking about something else.

93.103.171.29 (talkcontribs)

you should do this in categories, like all types of a=á,å,â,... similar for phonetics etc. and include keyboard shortcuts, so when a is pressed in editor all sounds and forms of a are present. for math simbols you could include short words that indicate symbols like 3(Dot)5 or something like LaTeX or similar. I don't think the tool would be very useful otherwise, because it takes way too much time looking for characters.

Simulo~mediawikiwiki (talkcontribs)

Thanks. I was not referring to character input though, it was a more general question of how to extend the functionality of the VisualEditor. In my specific case this would be a custom popup dialog (action: dialog) that inserts a link to a picture recently uploaded by the editing user.

This post was posted by Simulo~mediawikiwiki, but signed as Simulo.

Jdforrester (WMF) (talkcontribs)
I was not referring to character input though, it was a more general question

I think the user was responding to the general request for input on the character input tool, rather than your question, and just responded on the wrong thread; I've moved it here instead.

In my specific case this would be a custom popup dialog (action: dialog) that inserts a link to a picture recently uploaded by the editing user.

Interesting! It was suggested in bug 60398 that we do this in VisualEditor itself, and there's a work in progress commit to do this which you might be interested in.

Platonykiss (talkcontribs)

Thank you for inviting me here. Indeed the tool "special characters" is very important. I am very content, how it works with the conventional source editor (as I admire wikipedia technology in general, just to let you know that criticism here is on a very high level), but the tool in the beta editor, as it is now, is useless for me.

1) The box should not be fixed within the text (better with the toolbar), otherwise I have to open and to close it again. I just opened it and then the box was hiding the word, which I wanted to correct.

2) The design is nice, but it has not the characters I need (even for IPA this is not enough, not even for the vowels, and where are the consonants and semivowels?).

3) If I tell you precisely which characters I need, you will never satisfy the users. Users should choose between different languages, let's say between Cyrillic or even Glagolitic for those who work with Slavic sources, and polytonic Greek, or phonetic alphabet. The current choice for everybody is not useful, because the Latin alphabet does not often need diacritics. You need some for Spanish, others for Slavic languages who do not longer use Cyrillic (Polish needs ł,Ł,ą,ę,ó,ś,ń,ź,ć, and ż; Czech Š,š,Č,č,Ž,ž etc.), while other would like transcribe the Arabic or Persian alphabet. I advice to compose certain choices which are adapt to different user profiles. Please don't hesitate to ask questions.

Elitre (WMF) (talkcontribs)

Platonykiss, thanks for your thoughts. Real use cases are what James is looking for, so "I need ALL the characters!" or "I don't need any of them" are both useful information for him :) This said, wikis can already change those sets locally in the meantime if they urgently need something that is missing.

Nnemo (talkcontribs)

“the Latin alphabet does not often need diacritics”

Platonykiss, I bet that you are not a native francophone.

Platonykiss (talkcontribs)

Though I am regularly in France, I am not a fan of the French keyboard. I do not need it to have all characters I need to write in this language, or to say it in a way useful for you, I do not need your tool at all to write in those languages. This is probably not an anglophone perspective to it, I suppose... ;D

Reply to "Special characters"