Help:Extension:Kartographer/sv

From mediawiki.org
This page is a translated version of the page Help:Extension:Kartographer and the translation is 0% complete.
Outdated translations are marked like this.
PD OBS: När du redigerar denna sida samtycker du till att släppa ditt bidrag under CC0. Se hjälpsidorna för Public Domain för mer information.
PD

Main help pages:

The Kartographer extension allows you to create interactive and static maps on Wikimedia wiki pages. This page is an exhaustive reference for using Kartographer, including the many options available when using the tags ‎<mapframe>, which embeds maps directly in wiki pages, and ‎<maplink>, which creates links to full-page interactive maps, and touches on the elements of GeoJSON supported by Kartographer. You'll find a wealth of examples at the bottom of the page.

For help with Kartographer and OpenStreetMaps, check out Help:Extension:Kartographer/OSM .

Basic map syntax

To place a map or a map link directly on a wiki page, Kartographer offers two tags: ‎<mapframe>, which embeds a map inline that links to a full-screen interactive map, and ‎<maplink>, which creates rich text (with an optional marker) that links to a full-screen interactive map.

Some wikis wrap these tags in templates, such as Mapbox and Mapframe. Consult your local wiki's Kartographer help page to see if your wiki has templates -- or use the tags directly with this document as your guide.


‎<mapframe>

San Francisco museums

The ‎<mapframe> tag embeds a map in a wiki page. The tag must be either empty or contain GeoJSON. See below for more resources on writing GeoJSON.

<mapframe text="San Francisco museums" width="350" height="350" zoom="13" longitude="-122.3988" latitude="37.8013" />


‎<maplink>

Genom att byta ut $mapframe mot $maplink skapas en länk till en helskärmskarta:

<maplink zoom="13" latitude="46.204391" longitude="6.143158"/>

46°12′16″N 6°8′35″E

Its attributes and usage are essentially identical to ‎<mapframe>; see below for the minor differences.

Attributes

Below you'll find a list of attributes for both ‎<mapframe> and ‎<maplink>.

Strictly speaking, the only attributes that are required (marked in the table with a *) are width and height; without a location specified, Kartographer will produce a zoomed-out world map of the specified size on the page.

When zoom is not specified, Kartographer applies a best-guess automatic zoom level based on the position of any markers or geoshapes in the map.

Usage within each tag:

  • attribute="value"
Attribute Value Description Examples
width* pixels, "full" The width of the map frame. "100%" also works as an alias for "full", but no other percentage. width=200, width="full"
height* pixels The height of the map frame. height=300
zoom 0-19 The level of map detail. Zoom level 0 displays the entire available map, and zoom level 19 shows the highest level of detail. When zoom is not specified, Kartographer applies a best-guess automatic zoom level based on the position of any markers or geoshapes present. zoom=12
latitude, longitude decimal degrees The position on earth. See this article in the GIS wiki for detailed information. If not specified, Kartographer will attempt to derive the center point from an article's content. latitude=46.204391 longitude=6.143158
align "left", "center", "right" The horizontal position of the map frame on the page. This value's default is defined by the directionality of the page language (RTL: "left"; LTR: "right"). With a value of "left" or "right", other wiki content will flow around the map (see the corresponding section of Special:MyLanguage/Help:Images. align="right"
lang language code, "local" The language to be used for map labels and markers. "local" uses the language of the area shown in the map. Note: Not all labels are available in every language. See also #Languages_and_fallbacks. lang=”es”
text wikitext Mapframe: Caption below the map frame. (Causes the frameless attribute to be ignored if specified.)

Maplink: Defines the text of the link which, when clicked, displays the full-screen map (Example). If no text attribute is specified for maplink, the link text is shown as the coordinates of the map's center (12°18′0″N 45°36′0″E).

text=“Map of New York marking the location of the Empire State Building”
frameless n/a Mapframe only: Causes the embedded map to be drawn without a frame (border). (Ignored if the text attribute is set, which forces a frame to be drawn.) The tag should be added without a value frameless
class "no-icon" Maplink only: Removes the marker icon normally shown before the link text. class=”no-icon”
* = required

Self-closing tags

When not using GeoJSON, you can use ‎<mapframe> and ‎<maplink> as self-closing, standalone tags.

Self-closing:

<mapframe width="350" height="350" zoom="13" longitude="-122.3988" latitude="37.8013" />

Enclosing GeoJSON:

<mapframe width="350" height="350" zoom="13" longitude="-122.3988" latitude="37.8013">
{
  "type": "Feature",
  "geometry": { "type": "Point", "coordinates": [-122.3988, 37.8013] },
}
</mapframe>


GeoJSON

Several groups of automatic counters

The ‎<mapframe> and ‎<maplink> tags can either be empty or contain valid GeoJSON, to annotate the map with markers, draw shapes, and apply a mask area.

For more detail on this broad topic, you can read this helpful introduction to GeoJSON as well as the full GeoJSON specification.

Anteckning Anteckning:

Markers

Complex map - marker, article link and image

Maps that use GeoJSON may contain one or more markers to point out special locations. These markers are set using marker-specific keywords under the "properties" level in GeoJSON.

Kartographer supports the simplestyle specification with Maki icons, which are available under the CC0 license. See the full list of supported icons.

<maplink text="Colorado State Capitol with marker icon" longitude="-104.98491" latitude="39.73939" zoom="17">
{
    "type": "Feature", "properties": 
        { 
            "marker-symbol": "town-hall", 
            "marker-color": "46ea5f", 
            "marker-size": "medium"
        }, 
    "geometry": 
        { 
            "type": "Point",
            "coordinates": [-104.98485267162323, 39.73928364167763] 
        }
}
</maplink>

Result: Colorado State Capitol with marker icon

Auto-counters

Multiple markers on a map can be grouped and named using patterns and counters. Below is a summary of styling attributes for items placed on a map using GeoJSON. For more information, see the simplestyle spec.

Attribute Value Description Example
marker-symbol icon name, "‑number", "‑letter"

Determines whether the incremental marker labels proceed by number (1, 2, 3...) or letter (A, B, C...). Automatic “-number” series go from 1-99, and letters from A-Z. If a group name is included like “-number-eat”, then multiple series are generated.
An icon name must be from this list.

"marker-symbol": "museum"
marker-color hexadecimal color A three- or six-character hexadecimal color value for each marker. "marker-color": "#228b22"
marker-size small, medium, large See examples of each size. "marker-size": "medium"
title wikitext When a marker is clicked, it will display wikitext specified in the "title" value. "title": "[[:en:Downtown_Aquarium,_Denver|Downtown Aquarium Denver]]"

Autocounters title highlighted example.png

description wikitext When a marker is clicked, it will display wikitext or an image specified in wikitext in the "description" value. "description": "[[File:Denver-DTA.jpg|150x150px]]"

Autocounters description highlighted example.png

For a rich variety of examples, see the Examples section.

Shapes

GeoJSON allows you to add lines and geometric areas as annotations to your map. You can define simple inline shapes or import them from external databases.

Inline

GeoJSON allows you to draw points (markers), simple lines and geometric areas as part of your map definition. The following examples include the "geometry" attribute of GeoJSON objects inside a Feature object. Consult the full GeoJSON specification for more information.

Object Coordinates (long/lat) Map feature GeoJSON example Effect
Point single position Marker
"geometry": {
"type": "Point",
"coordinates":
 [-122.629395, 45.505662]
}
Kartographer-point-inline.png
LineString two or more positions Line connecting two points
"geometry": {
"type": "LineString",
"coordinates":
[
 [-122.321777, 47.598526],
 [-122.629395, 45.505662]
]}
Kartographer-line-inline.png
Polygon four or more positions, first and last identical Polygon with shaded interior
"geometry": {
"type": "Polygon",
"coordinates": [
[
  [-122.365723, 48.209576],
  [-123.947754, 46.949528],
  [-122.695313, 44.776709],
  [-120.629883, 46.573148],
  [-122.365723, 48.209576]
]]}
Kartographer-polygon-inline.png
Object Coordinates (long/lat) Map feature
MultiPoint multiple positions multiple points (markers)
MultiLineString multiple sets of LineString positions multiple lines
MultiPolygon multiple sets of Polygon positions multiple polygons

External data

A geoshape of Alaska

GeoJSON allows you to obtain outlines of geographical objects from external sources using the "type" attribute with the value "ExternalData".

Maps can draw from well-known geographical objects in the OpenStreetMap database by using their Wikidata ID; they can also come from Wikidata SPARQL queries or from shapes in Wikimedia Commons (.map files).

Additionally, maps can link directly to raw GeoJSON stored on Wikimedia Commons: see Help:Map Data for details.

Objects can be rendered using shape data from an external source in three different ways:

  • "service": "geoline" - Draws a simple line.
  • "service": "geoshape" - Draws a polygon with a shaded interior.
  • "service": "geomask" - Draws a polygon and shades everything outside the polygon.

Anteckning Anteckning:

Shapes via Wikidata ID

Combined map of Salzburg and Elixhausen
Attribute Value
type ExternalData
service geoshape: Wikidata ID geoshape in OSM
ids One or more Wikidata IDs, separated by commas

Wikidata IDs are relatively new to the OSM community. As of early 2022 there are roughly 1.9 million elements with Wikidata IDs. You can add your own at https://www.openstreetmap.org/ -- be sure to add the wikidata tag and the corresponding QID value. The data typically becomes available to Kartographer within two days. Learn more at the OSM wiki.

<mapframe height="300" width="300" text="Combined map of Salzburg and Elixhausen">
{
  "type": "ExternalData",
  "service": "geoshape",
  "ids": "Q34713,Q701153"
}
</mapframe>


Shapes via Wikidata query

Governors of US states with their party affiliation

Instead of a Wikidata Item ID, a map can also derive geoshapes from a Wikidata query in SPARQL. (You can create SPARQL queries using the Query Builder.)

Attribute Value
type ExternalData
service geoshape: Wikidata ID geoshape in OSM
query a Wikidata SPARQL query
<mapframe longitude="-110" latitude="52" zoom="3" width="300" height="300" text="Governors of US states with their party affiliation">
{
  "type": "ExternalData",
  "service": "geoshape",
  "query": "SELECT ?id ?head (SAMPLE(?img) as ?img_) (min(?partyId) as ?party) (if(?party = '0', '#800000', if(?party = '1', '#000080', '#008000')) as ?fill) (concat('[[w:', substr(str(?link),31,400),  '{{!}}', ?headLabel, ']]') as ?title) (concat(?stateLabel, '\\n', '[[File:', substr(str(?img_), 52, 400), '{{!}}200px]]') as ?description) WHERE { ?id wdt:P31 wd:Q35657 . ?id wdt:P6 ?head . ?head wdt:P102 ?party . BIND(if(?party = wd:Q29468, '0', if(?party = wd:Q29552, '1', '2')) as ?partyId) SERVICE wikibase:label { bd:serviceParam wikibase:language 'en' . ?head rdfs:label ?headLabel . ?id rdfs:label ?stateLabel . } OPTIONAL { ?head wdt:P18 ?img . } ?link schema:about ?head . ?link schema:isPartOf <https://en.wikipedia.org/> .} GROUP BY ?id ?head ?headLabel ?link ?stateLabel"
}

For detailed instructions, see Help:Extension:Kartographer/OSM .



Map data from Commons

Map data in GeoJSON that is stored on Commons can be drawn on the map.

Attribute Value
type ExternalData
service page
title path to a .map file on Wikimedia Commons that contains valid GeoJSON.

For example: Neighbourhoods/New_York_City.map will draw from this map.

Further information: Help:Map Data
<mapframe width="300" height="400">
{
  "type": "ExternalData",
  "service": "page",
  "title": "Neighbourhoods/New York City.map"
}
Akta! Akta: The map loader does not currently support chained ExternalData calls. If a resource of type ExternalData is fetched that itself relies on ExternalData references, loading will fail. See ärende T155927 and ärende T193458.
Akta! Akta: Filenames of .map files are limited to 400 characters in length and a file size of 2MiB. Keep this in mind when creating files for this purpose in Wikimedia Commons.


Mask layer

Map of Salzburg with mask

A mask is just an inside-out shape, specified in the same way but with the exterior of the shape shaded.

<mapframe align="right" height="420" width="420" latitude="47.7992" longitude="13.0482" zoom="11"  text="Map of Salzburg with mask">
{
  "type": "ExternalData",
  "service": "geomask",
  "ids": "Q34713",
  "properties": {
    "fill": "#555555",
    "fill-opacity": 0.5,
    "stroke": "#000000",
    "stroke-width": 1,
    "stroke-opacity": 1
  }
}
</mapframe>

Combining multiple data types

You can combine ExternalData, Feature, and FeatureCollection objects together in the same ‎<mapframe> or ‎<maplink> element, for example to highlight features with titles and descriptions on top of externally sourced objects.

Map data from Commons can be combined with other types of data by grouping them in parallel blocks of GeoJSON. See #Mixed types for various combinations.



Styling shapes

Interstate Highway I-696

In addition to the marker styling above, lines and areas support these simplestyle properties:

Attribute Value Description
stroke hexadecimal color The color of the line or outline.
stroke-width pixels The thickness of the shape's line.
stroke-opacity 0.0-1.0 Defines the transparency of the shape's line. A setting of 1 draws a solid line; 0 is invisible; larger values (approaching 1) show less of the background through the line.
fill hexadecimal color The color used to fill in the shape.
fill-opacity 0.0-1.0 Defines the transparency of the fill area. A setting of 1 paints an opaque area within the shape; 0 is invisible; larger values (approaching 1) show less of the background through the fill area.


Overlapping elements

Map elements that overlap are drawn in the order they appear in the code. If a map includes two lines that overlap, the line defined first will appear beneath the line defined next. This applies to any elements defined in the code that draw on the map.

Examples

<mapframe width="500" height="270" longitude="79.030" latitude="-24.794" zoom="8" align="center">
{
"type": "FeatureCollection",
"features": [
{
"type": "Feature",
"properties": {"fill": "#ff0000","fill-opacity": 0.7,"stroke-width": 0},
"geometry": {
 "type": "Polygon",
 "coordinates": [
 [
   [77.926025390625, -25.150257104114733],
   [80.14251708984374, -25.150257104114733],
   [80.14251708984374, -24.43714786161562],
   [77.926025390625, -24.43714786161562],
   [77.926025390625, -25.150257104114733]
 ]
 ]
 }
 },
{
"type": "Feature",
"properties": {"stroke": "#fffa00","stroke-width": 5},
"geometry": {
 "type": "LineString",
 "coordinates": [
   [77.926025390625, -25.150257104114733],
   [80.14251708984374, -24.43714786161562]
 ]
 }
 },
{
"type": "Feature",
"properties": {"stroke": "#000000","stroke-width": 5},
"geometry": {
 "type": "LineString",
 "coordinates": [
   [77.926025390625, -24.43714786161562],
   [80.14251708984374, -25.150257104114733]
 ]
 }
 }
 ]
}
</mapframe>

The code for the map above includes three elements, all of which use GeoJSON's "feature" functionality. The first feature is a "Polygon" - the red rectangle. This is followed by two "LineString" features. The yellow line is defined first, so it appears beneath the black line. Note that the hierarchy used to draw elements applies regardless of whether the data is raw GeoJSON or comes from a Wikidata ID or Commons data page.

The map below changes the order from that of the first example: the black line is defined first and is thus moved to the bottom of the stack:

GeoJSON resources

Reference

Guides

Editors and tools

Grupper

error

De olika språkversionerna av Wikivoyage behöver kunna visa en kartbild med information som inte ligger i själva kartan, utan någon annanstans på sidan. Det kan till exempel finnas flera intressepunkter (points of interest, POI), IP, som lagts in med $maplink-taggar, men bara en gemensam karta på hela sidan som visar alla punkterna. There may be multiple points of interest (POI) defined with ‎<maplink> tags, all of which appear on a single common map on the side of the page. (See an example using the city of Salzburg.)

Gruppfunktionen ger bidragsgivare möjlighet att dela data mellan flera olika $mapframe- and $maplink-taggar.

Grundinställningen innebär att värdet i $mapframe- eller $maplink-taggen bara visas för just den taggen och inte någon annanstans.

Om mapframe eller $maplink specificerar $group-funktionen kommer värdena i dessa taggar att läggas in i en viss grupp, tillsammans med alla andra värden som givits samma gruppnamn. Resultatet blir att alla taggar med samma gruppnamn kommer att visa samma kartdata och varje tagg kan lägga till mer data i gruppen.

Each ‎<mapframe> tag on a Wikivoyage tag displays an embedded map displaying the groups specified in its tag.

En tagg kan också visa andra grupper, oavsett om den finns i en grupp eller ej, genom att man specificerar show="..."-funktionen. Flera gruppnamn kan användas om de åtskiljs av ett kommatecken. Gruppnamnet kan bara använda engelskspråkiga gemener (Små bokstäver). Den här tabellen visar vilken data som visas för de olika taggarna.

Example:

<maplink>                               -- shows 1
<maplink group='food'>                  -- shows   2   4       8   10
<maplink group='bar'  show='bar'>       -- shows     3           9
<maplink group='food' show='bar'>       -- shows   2 3 4       8 9 10
<maplink              show='bar'>       -- shows     3   5       9
<maplink              show='food,bar'>  -- shows   2 3 4   6   8 9 10
<mapframe>                              -- shows             7
<mapframe group='food'>                 -- shows   2   4       8   10
<mapframe group='bar'  show='bar'>      -- shows     3           9
<mapframe group='food' show='bar'>      -- shows   2 3 4       8 9 10
<mapframe              show='bar'>      -- shows     3           9    11
<mapframe              show='food,bar'> -- shows   2 3 4       8 9 10    12
Wikivoyage pages also sometimes wrap the ‎<mapframe> and ‎<maplink> tags in templates. Consult Mapshape, Listing and See for a good starting place.

Languages and fallbacks

Kartographer maps get their labels from the open-source mapping project OpenStreetMap (https://www.openstreetmap.org/). By default, Kartographer tries to display map labels in the language of the wiki in which the embedded map is displayed. If that language is not available, then the map will use the given wiki's configured fallback language, then the local language in the map region specified in the Kartographer map. If none of these are available, Kartographer will display no label.

You can specify the language to use for labels with the lang attribute and by setting its value to the desired language code Example: lang="ja" will display labels in Japanese, if available.

To use the language local to the map area, specify lang=local. For more information about using the local language in your labels, and about OpenStreetMap multilingual data in general, read this post. Kartographer maps get their data, including map label data in all available languages, from the open-source mapping project OpenStreetMap. If the map you want to display doesn't offer labels in the desired language, you can always add labels in that language by adding them yourself to OpenStreetMap. Note that country and city names are drawn from label nodes in OpenStreetMap, not from the data attached to boundary relations. To get started, see the OpenStreetMap Beginners’ Guide and these best practices in naming conventions.

Examples

Simple

San Francisco museums
<mapframe text="San Francisco museums" width="350" height="350" zoom="13" longitude="-122.3988" latitude="37.8013">
{
  "type": "Feature",
  "geometry": { "type": "Point", "coordinates": [-122.3988, 37.8013] },
  "properties": {
    "title": "[[w:Exploratorium|Exploratorium]]",
    "description": "[[File:Giant_Mirror_at_the_Exploratorium.jpeg|200px]]",
    "marker-symbol": "museum",
    "marker-size": "large",
    "marker-color": "0050d0"
  }
}
</mapframe>


Markers and counters

Colorado State Capitol with a town hall marker, article link and image

<maplink text="Colorado State Capitol with a town hall marker, article link and image" longitude="-104.98491" latitude="39.73939" zoom="17">
{
      "type": "Feature",
      "properties": { "marker-symbol": "town-hall", "marker-color": "46ea5f", "marker-size": "medium", "title": "[[w:Colorado_State_Capitol|Colorado State Capitol]]", "description": "[[File:Coloradocapitolhill2.JPG|150px]]"},
      "geometry": { "type": "Point", "coordinates": [-104.98485267162323, 39.73928364167763] }
}
</maplink>


Numbered markers

Colorado State Capitol with a number marker

<maplink text="Colorado State Capitol with a number marker" longitude="-104.98491" latitude="39.73939" zoom="17">{ "type": "Feature", "properties": {  "marker-color": "228b22", "marker-symbol": "-number"}, "geometry": { "type": "Point", "coordinates": [-104.98485267162323, 39.73928364167763] }}</maplink>


Lettered markers

Colorado State Capitol with a letter marker

<maplink text="Colorado State Capitol with a letter marker" longitude="-104.98491" latitude="39.73939" zoom="17">{ "type": "Feature", "properties": {  "marker-color": "508e33", "marker-symbol": "-letter"}, "geometry": { "type": "Point", "coordinates": [-104.98485267162323, 39.73928364167763] }}</maplink>


Several markers in a feature collection

Denver Amusements

<maplink text="Denver Amusements" longitude="-105.01247406005858" latitude="39.74956567318853" zoom="14"> {"type": "FeatureCollection", "features":  [{ "type": "Feature", "geometry": { "type": "Point", "coordinates": [-105.00768899917603, 39.74859230437501] }, "properties": { "title": "[[w:Pepsi_Center|Pepsi Center]]", "marker-color": "420617", "marker-symbol": "-letter-see", "marker-size":"small"} }, { "type": "Feature", "geometry": { "type": "Point", "coordinates": [-105.01238822937012, 39.7526011757416] }, "properties": { "title": "[[w:Downtown_Aquarium%2C_Denver|Downtown Aquarium Denver]]", "marker-color": "508e33", "marker-symbol": "-letter-see","marker-size":"medium", "description": "[[File:Denver-DTA.jpg|150px]]" } }, { "type": "Feature", "geometry": { "type": "Point", "coordinates": [-105.01247406005858, 39.74956567318853] }, "properties": { "title": "[[w:Confluence_Park|Confluence Park]]", "marker-color": "0d2751", "marker-symbol": "-letter-see", "marker-size":"large" } }, { "type": "Feature", "geometry": { "type": "Point", "coordinates": [-105.01646518707275, 39.74656303364532] }, "properties": { "title": "South Platte Bike Trail", "marker-color": "61b9e2", "marker-symbol": "-number-see", "marker-size":"medium" } },]}</maplink>


Groups of automatic counters

Several groups of automatic counters
<mapframe text="Several groups of automatic counters" width="350" height="350" zoom="13" longitude="-122.39902496337889" latitude="37.80151060070086">
{
  "type": "FeatureCollection",
  "features": [
    {
      "type": "Feature",
      "properties": {
        "marker-symbol": "-number",
        "marker-color": "302060"
      },
      "geometry": {
        "type": "Point",
        "coordinates": [
          -122.41816520690917,
          37.79097260220947
        ]
      }
    },
    {
      "type": "Feature",
      "properties": {
        "marker-symbol": "-number",
        "marker-color": "302060"
      },
      "geometry": {
        "type": "Point",
        "coordinates": [
          -122.40786552429199,
          37.799654055191525
        ]
      }
    },
    {
      "type": "Feature",
      "properties": {
        "marker-symbol": "-number",
        "marker-color": "302060"
      },
      "geometry": {
        "type": "Point",
        "coordinates": [
          -122.40185737609865,
          37.796262984039544
        ]
      }
    },
    {
      "type": "Feature",
      "properties": {
        "marker-symbol": "-number",
        "marker-color": "302060"
      },
      "geometry": {
        "type": "Point",
        "coordinates": [
          -122.38743782043457,
          37.80535070427755
        ]
      }
    },
    {
      "type": "Feature",
      "properties": {
        "marker-symbol": "-number",
        "marker-color": "302060"
      },
      "geometry": {
        "type": "Point",
        "coordinates": [
          -122.38005638122557,
          37.795449103799726
        ]
      }
    },
    {
      "type": "Feature",
      "properties": {
        "marker-symbol": "-letter",
        "marker-color": "208020"
      },
      "geometry": {
        "type": "Point",
        "coordinates": [
          -122.40941047668457,
          37.81850557172186
        ]
      }
    },
    {
      "type": "Feature",
      "properties": {
        "marker-symbol": "-letter",
        "marker-color": "208020"
      },
      "geometry": {
        "type": "Point",
        "coordinates": [
          -122.40357398986815,
          37.81280993744834
        ]
      }
    },
    {
      "type": "Feature",
      "properties": {
        "marker-symbol": "-letter",
        "marker-color": "208020"
      },
      "geometry": {
        "type": "Point",
        "coordinates": [
          -122.39842414855956,
          37.8071138637568
        ]
      }
    },
    {
      "type": "Feature",
      "properties": {
        "marker-symbol": "-number-bar",
        "marker-color": "f01080"
      },
      "geometry": {
        "type": "Point",
        "coordinates": [
          -122.41181373596191,
          37.78595317184089
        ]
      }
    },
    {
      "type": "Feature",
      "properties": {
        "marker-symbol": "-number-bar",
        "marker-color": "f01080"
      },
      "geometry": {
        "type": "Point",
        "coordinates": [
          -122.39542007446289,
          37.787674400057654
        ]
      }
    },
    {
      "type": "Feature",
      "properties": {
        "marker-symbol": "-number-bar",
        "marker-color": "f01080"
      },
      "geometry": {
        "type": "Point",
        "coordinates": [
          -122.38649368286131,
          37.78401144262929
        ]
      }
    }
  ]
}
</mapframe>


ExternalData

Wikidata QID

State of Colorado, outlined

<maplink text="State of Colorado, outlined" zoom="7" > { "type": "ExternalData", "service": "geoshape", "ids": "Q1261" } </maplink>


Wikidata query

Governors of US states with their party affiliation
<mapframe longitude="-110" latitude="52" zoom="3" width="500" height="500" text="Governors of US states with their party affiliation">
{
  "type": "ExternalData",
  "service": "geoshape",
  "query": "SELECT ?id ?head (SAMPLE(?img) as ?img_) (min(?partyId) as ?party) (if(?party = '0', '#800000', if(?party = '1', '#000080', '#008000')) as ?fill) (concat('[[w:', substr(str(?link),31,500),  '{{!}}', ?headLabel, ']]') as ?title) (concat(?stateLabel, '\\n', '[[File:', substr(str(?img_), 52, 500), '{{!}}200px]]') as ?description) WHERE { ?id wdt:P31 wd:Q35657 . ?id wdt:P6 ?head . ?head wdt:P102 ?party . BIND(if(?party = wd:Q29468, '0', if(?party = wd:Q29552, '1', '2')) as ?partyId) SERVICE wikibase:label { bd:serviceParam wikibase:language 'en' . ?head rdfs:label ?headLabel . ?id rdfs:label ?stateLabel . } OPTIONAL { ?head wdt:P18 ?img . } ?link schema:about ?head . ?link schema:isPartOf <https://en.wikipedia.org/> .} GROUP BY ?id ?head ?headLabel ?link ?stateLabel"
}
</mapframe>


Map data from Commons

<mapframe width="300" height="400">
{
  "type": "ExternalData",
  "service": "page",
  "title": "Neighbourhoods/New York City.map"
}
</mapframe>


Mixed types

Caderousse city wall
<mapframe text="Caderousse city wall" width="300" height="300" zoom="15" longitude="4.75600" latitude="44.10200">
[
  {
    "type": "ExternalData",
    "service": "geoshape",
    "ids": "Q13518258",
    "properties": {
      "stroke": "#ffb100",
      "stroke-width": 6,
    }
  },
  {
    "type": "Feature",
    "geometry": { "type": "Point", "coordinates": [4.75566, 44.104498] },
    "properties": {
      "title": "Porte de Castellan"
    }
  },
  {
    "type": "Feature",
    "geometry": { "type": "Point", "coordinates": [4.75829, 44.10258] },
    "properties": {
      "title": "Porte Léon Roche"
    }
  }
]
</mapframe>


Mixed types with markers

<mapframe width="300" height="300" zoom="12" longitude="-73.965278" latitude="40.782222">
[
  {
    "type": "ExternalData",
    "service": "page",
    "title": "Neighbourhoods/New York City.map"
  },
  {
    "type": "ExternalData",
    "service": "geoshape",
    "ids": "Q160409",
    "properties": {
      "fill": "#07c63e", "title": "Central Park"
    }
  },
  {
    "type": "Feature",
    "properties": {"title": "Roosevelt Island", "marker-color": "f01080"},
    "geometry": {
      "type": "Point",
      "coordinates": [
        -73.94511222839355,
        40.76734665426719
      ]
    }
  }
]
</mapframe>



Rendering options

The following table shows how a ‎<mapframe> map can be formatted for display on a wiki page. The table contains two columns: the first shows an interactive map via the ‎<mapframe> tag, and the second shows the rendering of an example image with the same options.

Options Rendering a ‎<mapframe> Rendering an image
  • Format: frame
  • Alignment: undefined
... text text text
text text text ...
... text text text
Example en.svg
text text text ...
  • Format: frame
  • Alignment: none
Not supported: see ärende T157502. ... text text text
Example en.svg
text text text ...
  • Format: frame
  • Alignment: left
... text text text
text text text ...
... text text text
Example en.svg
text text text ...
  • Format: frame
  • Alignment: center
... text text text
text text text ...
... text text text
Example en.svg
text text text ...
  • Format: frame
  • Alignment: right
... text text text
text text text ...
... text text text
Example en.svg
text text text ...
  • Format: frameless
  • Alignment: undefined
... text text text text text text ...

Inconsistent, see ärende T157640.
... text text text Example en.svg text text text ...
  • Format: frameless
  • Alignment: none
Not supported: see ärende T157502. ... text text text
Example en.svg
text text text ...
  • Format: frameless
  • Alignment: left
... text text text text text text ... ... text text text
Example en.svg
text text text ...
  • Format: frameless
  • Alignment: center
... text text text text text text ... ... text text text
Example en.svg
text text text ...
  • Format: frameless
  • Alignment: right
... text text text text text text ... ... text text text
Example en.svg
text text text ...

Use the width value full in order to make the map take up the full width of the page.

<mapframe width="full" height="200" zoom="13" longitude="-122.39953994750977" latitude="37.81032643553478"></mapframe>
<mapframe width="full" height="200" zoom="13" longitude="-122.39953994750977" latitude="37.81032643553478" frameless></mapframe>

Styling

Interstate Highway I-696
<mapframe text="Interstate Highway I-696" width="300" height="300" longitude="-83.2297" latitude="42.4883" zoom="9">
{
  "type": "ExternalData",
  "service": "geoline",
  "ids": "Q2108",
  "properties": {
    "title": "Highway I-696",
    "description": "[[File:I696-1988.JPG|200px]]",
    "stroke": "#ffb100",
    "stroke-width": 8
  }
}
</mapframe>


See also