Jump to content

Extension:FlaggedRevs/ko

이슈 트래커: #MediaWiki-extensions-FlaggedRevs
From mediawiki.org
This page is a translated version of the page Extension:FlaggedRevs and the translation is 1% complete.
Languages:
경고 경고: Flagged Revisions is complex, poorly documented, very clunky, and not recommended for production use, despite the "stable" tag. This extension has not been deployed (newly installed) to any Wikimedia wiki since 2014. See Code stewardship review: FlaggedRevs.
As of 2025, Extension:Approved Revs has a similar purpose and is reasonably maintained, although much less advanced (no rating). Other alternatives are listed on Content approval extensions .
미디어위키 확장 기능 설명서
Flagged Revisions
출시 상태: 안정
구현 사용자 인터페이스, 특수 문서 , 사용자 권한 , 데이터베이스 , Ajax, API
설명 Allows for article content management by "editor" and "reviewer" classes.
만든 이 Aaron Schulz, Joerg Baach
호환성 정책 스냅샷은 미디어위키와 함께 릴리스됩니다. Master is not backward compatible.
데이터베이스 변경 예
테이블
변수
  • $wgFlaggedRevsRestrictionLevels
  • $wgFlaggedRevsNamespaces
  • $wgFlaggedRevsTagsAuto
  • $wgFlaggedRevsAutoReview
  • $wgFlaggedRevsHandleIncludes
  • $wgFlaggedRevsTagsRestrictions
  • $wgFlaggedRevsTags
  • $wgFlaggedRevsLowProfile
  • $wgFlaggedRevsAutoconfirm
  • $wgFlaggedRevsOverride
  • $wgFlaggedRevsProtection
  • $wgFlaggedRevsAutopromote
  • $wgSimpleFlaggedRevsUI
추가되는 권한

  • review
  • validate
  • autoreview
  • autoreviewrestore
  • unreviewedpages
  • stablesettings
  • movestable
사용된 훅
훅 제공
Licence GNU General Public License 2.0 or later
다운로드
확장 기능 다운로드
Git [?]:
FlaggedRevs 확장 기능 번역
이슈 미해결 작업 · 버그 보고

The Flagged Revisions extension allows for Editor and Reviewer users to rate revisions of articles and set those revisions as the default revision to show upon normal page view. This allows for MediaWiki to act more like a Content Management System (CMS).

Installation

  • 파일을 다운로드하고 FlaggedRevs 폴더를 extensions/ 디렉토리에 넣어 주세요.
    개발자와 코딩 기여자는 Git을 이용해 확장기능을 다운받는 것이 좋습니다.
    cd extensions/
git clone https://gerrit.wikimedia.org/r/mediawiki/extensions/FlaggedRevs
  • 아래의 코드를 LocalSettings.php 코드의 마지막에 추가합니다. 
    wfLoadExtension( 'FlaggedRevs' );
  • 갱신 스크립트를 실행합니다. 이 스크립트는 이 확장기능을 필요로 하는 데이터 베이스 테이블을 자동적으로 작성합니다.
  • Configure as required.
  • Yes 완료 – 위키의 ‘Special:Version’에 이동해서, 확장기능이 올바르게 설치된 것을 확인합니다.

Setup

AllowEncodedSlashes

If you are using Apache 2.3.12 or later, you should set AllowEncodedSlashes to "NoDecode". Add the following line to your ‎<VirtualHost> or, if you don't have one, at the end of your httpd.conf file: 

AllowEncodedSlashes NoDecode

After you edited httpd.conf, Apache needs to be restarted.

Alter your .htaccess (if needed)

If you are shortening your URLs , you need to add an exception to .htaccess to allow the use of the REST API .

FlaggedRevs calls on rest.php . For example: 

https://[domain]/w/rest.php/flaggedrevs/internal/review/Main_Page

If the .htaccess conditions are not properly set when the above URL is called, FlaggedRevs will literally try to access an article named "W/rest.php/flaggedrevs/internal/review/Main Page".

Here is one way to add an exception to .htaccess, emphasis added: 

RewriteEngine On

RewriteCond %{REQUEST_URI} !^/w/rest\.php
RewriteCond %{DOCUMENT_ROOT}%{REQUEST_URI} !-f
RewriteCond %{DOCUMENT_ROOT}%{REQUEST_URI} !-d

RewriteRule ^(.*)$ w/index.php?title=$1 [L,QSA]
RewriteRule ^$ w/index.php [L,QSA]

Promote users to reviewers

After FlaggedRevs is first installed, no user can see the reviewer's widget. To fix this, login as a wiki bureaucrat and go to Special:UserRights, then grant review rights to one or more users. Reviewers will see the reviewer's widget on the bottom of an editable page.

Article review statistics (optional)

This applies to Unix-like systems and assumes that MediaWiki is installed in /var/www/mediawiki.

For a scheduled collection of article review statistics (viewable at Special:ValidationStatistics), create a cron job to run extensions/FlaggedRevs/maintenance/updateStats.php at a regular interval. Run time php updateStats.php to see how long the script takes to run and set your cron jobs interval appropriately. For example, to create a cron job that runs updateStats.php every hour, add the following to the crontab for the user running the web server (e.g., www-data): 

@hourly php /var/www/mediawiki/extensions/FlaggedRevs/maintenance/updateStats.php

Configuration

User rights and user groups

By default, nobody can review anything, so the first step is to set up user rights.

User groups User rights
reviewer validate
review
editor
autoreview
unreviewedpages

User rights

FlaggedRevs creates the following new user rights:

  • review – user can review revisions
  • validate – user can review revisions and can set all tags to all levels
  • autoreview – any new revisions made by the user are automatically marked as sighted
  • autoreviewrestore – autoreview of the rollbacks made by the user
  • unreviewedpages – user can view Special:UnreviewedPages
  • stablesettings – user can change the settings of stable revisions of any page
  • movestable – user can move pages with stable revisions

User groups

FlaggedRevs creates the following new user groups:

  • editor – receive autoreview, review, unreviewedpages, plus the standard MediaWiki user rights autoconfirmed, editsemiprotected
  • reviewer – receive autoreview, review, unreviewedpages, validate, plus the standard MediaWiki user rights autoconfirmed, editsemiprotected
  • autoreview – receive autoreview

How to assign user rights

User rights can be assigned in two ways:

  • Assigning rights to user groups


Assign these user rights to existing user groups in LocalSettings.php : 

$wgGroupPermissions['sysop']['review'] = true; //allow administrators to review revisions
  • Assigning rights to specific users


Manually add user accounts to the appropriate groups via Special:UserRights.

By default:
  • Bureaucrats can add/remove Reviewers
  • Administrators can add/remove both Autoreviewers and Editors.

Basic settings

FlaggedRevs.php comes with a number of configurable variables. These should be configured in LocalSettings.php.

  • $wgFlaggedRevsNamespaces – Sets what namespaces may be subject to the review process. This is an array of integers. See Manual:Namespace constants to see what integer the default namespaces map to and use the defined constants for readability.
  • $wgFlaggedRevsTags – Sets the tags and their levels setting.
    Definition
    $wgFlaggedRevsTags is a bidimensional associative array with keys corresponding to each tag name. Values are associative arrays, whose only meaningful/supported element (as of 2025 (MediaWiki 1.43)) is levels, which contains an integer controlling the number of review levels.
    Labeling
    • Each tag can be labeled editing the page MediaWiki:revreview-<tag-name>.
    • Each tag level can be labeled editing the page MediaWiki:revreview-<tag-name>-<level-number>.
    By default, the tag is labeled as it appears in the $wgFlaggedRevsTags array. To override this, and show tags for example as their capitalized name, the admins have to edit these pages with the shown content, for example changing the content of MediaWiki:revreview-accuracy
To label the tag levels, the admins have to create these pages with the shown content:
tag level labeling page content
accuracy 0 MediaWiki:revreview-accuracy-0 부적절
1 MediaWiki:revreview-accuracy-1 부분적으로 확인함
2 MediaWiki:revreview-accuracy-2 정확함
The resulting setup will be:
tag names level names
정확성 부적절 부분적으로 확인함 정확함
  • $wgFlaggedRevsOverride – Whether the stable version is the default content for pages.
    Individual pages can be configured to have the stable or draft version as the default content by administrators.
  • $wgFlaggedRevsTagsRestrictions – An array with keys corresponding to each flag type, and values that are arrays of rights and how high users with it can rate the flags (integral tag level).
    Example
    $wgFlaggedRevsTagsRestrictions = [
	'accuracy' => [ 'review' => 1 ],
];

User interface

  • $wgSimpleFlaggedRevsUI – When enabled, a simpler, icon based UI is used. Does not affect the tags shown in edit mode.
  • $wgFlaggedRevsLowProfile – This setting hides the review status box/bar for pages that are reviewed in their latest version. Explanatory text is also removed from some places.

Workflow

  • $wgFlaggedRevsAutoReview – If enabled, every edit by a user with 'autoreview' rights is automatically reviewed upon save. There is no need to hit the "submit review" button. This feature requires that the previous revision was also reviewed; otherwise, auto-review will not occur.
  • $wgFlaggedRevsTagsAuto – If wgFlaggedRevsAutoReview is enabled, this settings controls how high each tag can be auto-reviewed. If allowed, tags will be auto-reviewed to the same level the previous revision tags were. This is an associative array; each key is a tag and each value is a tag level.
    Example
    $wgFlaggedRevsTagsAuto = [
	'accuracy' => 1
];
Changes in templates are auto-reviewed (per-page). This could possibly cause bad versions to be reviewed. Users should be encouraged to use preview or review the page after saving. You may want to set $wgNamespaceProtection[NS_TEMPLATE] as [ 'editor' ] or [ 'autoconfirmed' ]

Automatic user promotion

  • $wgFlaggedRevsAutopromote – An array with keys for days, edits, time spacing, benchmarks, emailconfirmed, recent content page edits, total content edits, content pages edited, edit summaries used, IP uniqueness, and userpage existence as keys. The values correspond to how many days/edits are needed for a user account to be autopromoted to Editor status and whether they must be emailconfirmed and have a user page do so. The user must have at least X edits that are Y or more days apart, where X is the number of benchmarks and Y is the time spacing. Set this variable to false to disable this entirely.
    • If a user has their Editor rights removed, they will not automatically be re-granted (the editor status log is checked for revocations).
    • Some of these counts are not retroactive, so you may notice a delay in promotions.
    Example
    For $wgFlaggedRevsAutopromote, one might have:
    $wgFlaggedRevsAutopromote['days'] = 60; # days since registration
$wgFlaggedRevsAutopromote['edits'] = 150; # total edit count
$wgFlaggedRevsAutopromote['excludeDeleted'] = true; # exclude deleted edits from 'edits' count above?
$wgFlaggedRevsAutopromote['spacing'] = 3; # spacing of edit intervals
$wgFlaggedRevsAutopromote['benchmarks'] = 15; # how many edit intervals are needed?
$wgFlaggedRevsAutopromote['recentContentEdits'] = 10; # $wgContentNamespaces edits in recent changes
$wgFlaggedRevsAutopromote['totalContentEdits'] = 30; # $wgContentNamespaces edits
$wgFlaggedRevsAutopromote['uniqueContentPages'] = 10; # $wgContentNamespaces unique pages edited
$wgFlaggedRevsAutopromote['editComments'] = 5; # how many edit comments used?
$wgFlaggedRevsAutopromote['email'] = true; # user must be emailconfirmed?
$wgFlaggedRevsAutopromote['userpageBytes'] = 0; # if userpage is needed, what is the min size?

Advanced

  • $wgFlaggedRevsRestrictionLevels – Restriction levels for autoreview/review rights. When a level is selected for a page, an edit made by a user will not be auto-reviewed if the user lacks the specified permission. Levels are set at Special:Stabilization.
  • $wgFlaggedRevsProtection – Set this to use FlaggedRevs only as a protection-like mechanism (Help:Pending changes ), rather than the standard configuration.
  • $wgFlaggedRevsAutoConfirm – Define when users get to have their own edits auto-reviewed. Set to false to disable.
  • $wgFlaggedRevsHandleIncludes – Whether to use stable versions of templates when rendering the stable version of a page.

To have a wiki where non-users can only see the stable version of articles, see Extension:FlaggedRevs/Restricting unapproved revisions .

Use

참조: Help:FlaggedRevs

Reviewing a page

Users with some level of review status will have a small rating form on page view (at the bottom of the page) and diffs (at the top of the page) that lets them review revisions. Each tag must at least meet the minimal level of approval.[명확한 설명 필요] When reviewing, users should look at the whole page, including templates and images. The (diff to stable) link is very useful for speeding up this process.

Users cannot review a page which they cannot edit. They cannot lower the level of a revision from a level they cannot set.[명확한 설명 필요] Blocked users cannot do anything.

Upkeep

At Special:UnreviewedPages, there is a list of pages that have not yet been reviewed, for Editors only. A namespace must be selected and an optional category filter is also present.

At Special:OldReviewedPages, there is a list of pages that have been reviewed, but have edits pending. This is for Editors only. An optional category filter is also present.

Pages that cannot be reviewed can still be patrolled for anti-vandalism purposes by Editors to see what has been checked already.

Logging

All relevant actions are permanently logged, so everything can be tracked and overseen properly.

  • A log of changes to the stable versioning configuration to pages is logged at Special:Log/stable.

Notes

Patrolling of reviewable pages is disabled, but flagged revisions are marked as patrolled in Recent Changes. This will mean that the only way to patrol a reviewable revision is to flag it. Non-reviewable pages still behave as normal (depending on site patrol settings).

  • Sysops can change whether the stable version is shown by default for specific pages.

To disable this, add $wgGroupPermissions['sysop']['stablesettings'] = false; to LocalSettings.php.

  • Page links, category, image, template, language, and external links are still based on the current version of pages.
  • Users cannot move pages they cannot review.

This is deliberate; see T15994. To work around this, add $wgGroupPermissions['autoconfirmed']['movestable'] = true; to LocalSettings.php

  • You can demote Editors either temporarily by blocking them or permanently via Special:UserRights.

An extra demotion log item will appear for tracking purposes.

API

FlaggedRevs adds API modules for reviewing revisions and configuring "stabilization" of pages, a module for retrieving flag configuration, and two list modules corresponding to the special pages for unreviewed pages and "old" reviewed pages.

action=review

Reviews a page.

Parameters
  • revid – The revision ID for which to set the flags
  • token – A csrf token retrieved through action=query&meta=tokens
  • comment – Comment for the review (optional)
  • flag_accuracy – Set the flag named "accuracy" to the specified value; (replace "accuracy" with the flag name to set another flag)
  • unapprove – If set, revision will be unapproved rather than approved
Example
Review revision 12345
api.php?action=review&revid=12345&token=123ABC&flag_accuracy=1&comment=OK [ApiSandbox에서 시도하기]
결과
<api>
  <review revid="12345" />
</api>

action=stabilize

Changes page stabilization settings.

Parameters
  • title – Title of page to be stabilized
  • reason – Reason for stabilization
  • expiry – Stabilization expiry. Default: infinite
  • review – Whether to auto-review the page
  • watch – Whether to watch the page
  • token – An edit token retrieved through action=query&meta=tokens
  • For protection-like configurations ($wgFlaggedRevsProtection=true):
  • protectlevel – The right users must have in order for their edits to not require review.
  • Otherwise ($wgFlaggedRevsProtection=false):
  • default – Default revision to show (latest | stable)
    autoreview – Restriction level for the autoreview right (sysop | none). Default: none
Example
Configure the page "Foo" such that only reviewed revisions are shown by default
api.php?action=stabilize&title=Foo&reason=Because_I_can&default=stable&token=abc123 [ApiSandbox에서 시도하기]
결과
<api>
  <stabilize title="Foo" default="stable" autoreview="none" expiry="infinite" />
</api>

action=flagconfig

Shows information about review flag configuration.

The following parameters are returned for each tag:

  • name – the name of the flag
  • levels – the number of possible levels the flag has (not counting the "unreviewed" level)

The displayed name for each flag and the different level names for each flag are MediaWiki messages, so can be set and retrieved through the appropriate page; for example, the name for the first level of the "accuracy" flag is located at MediaWiki:revreview-accuracy-1.

Example
Retrieve flag configuration
api.php?action=flagconfig [ApiSandbox에서 시도하기]
결과
<api>
  <flagconfig>
    <tag name="value" levels="3" tier1="1" />
  </flagconfig>
</api>

list=unreviewedpages

Lists pages which have never been reviewed.

Parameters
  • urstart – Start listing at this page title.
  • urend – Stop listing at this page title.
  • urnamespace – The namespaces to enumerate.
  • urfilterredir – How to filter for redirects
  • urfilterlevel – How to filter by quality (0=sighted,1=quality)
  • urlimit – How many total pages to return.
Example
List pages in the main namespace that have not been "sighted"
api.php?action=query&list=unreviewedpages&urnamespace=0&urfilterlevel=0 [ApiSandbox에서 시도하기]
결과
<api>
  <query-continue>
    <unreviewedpages urstart="Arbeitgeberverband_Chemie_und_verwandte_Industrien_für_das_Land_Hessen" />
  </query-continue>
  <query>
    <unreviewedpages>
      <p pageid="4762806" ns="0" title="Aaftink" revid="65175047" />
      <p pageid="4747500" ns="0" title="Abt RS6" revid="64976429" />
      <p pageid="4749877" ns="0" title="Acht Vorlesungen über den Konstruktiven Realismus" revid="65089962" />
      <p pageid="4758156" ns="0" title="Alkylglycerole" revid="65169004" />
      <p pageid="4719044" ns="0" title="All Riot" revid="64767732" />
      <p pageid="4745418" ns="0" title="Allgäu-Panorama-Marathon" revid="64974783" />
      <p pageid="4729976" ns="0" title="An- und Einpressen" revid="64742640" />
      <p pageid="4742559" ns="0" title="Anjara I. Bartz" revid="64925772" />
      <p pageid="4740681" ns="0" title="Anthony Norris Groves" revid="65064712" />
      <p pageid="4759964" ns="0" title="Antonino Asta" revid="65169073" />
    </unreviewedpages>
  </query>
</api>

list=oldreviewedpages

Lists pages that have at some point been reviewed, but for which the most recent revision is not reviewed.

Parameters
  • orstart – Start listing from this timestamp
  • orend – Stop listing at this timestamp.
  • ordir – In which direction to list.
  • ornamespace – The namespaces to enumerate.
  • orfilterredir – How to filter for redirects
  • orlimit – How many total pages to return.
Example
List pages in the main namespace with recent unreviewed revisions
api.php?action=query&list=oldreviewedpages&ornamespace=0 [ApiSandbox에서 시도하기]
결과
<api>
  <query-continue>
    <oldreviewedpages orstart="2009-09-15T20:23:05Z" />
  </query-continue>
  <query>
    <oldreviewedpages>
      <p pageid="144735" ns="0" title="Two International Finance Centre" revid="64562654" stable_revid="62769201" pending_since="2009-09-15T16:16:33Z" flagged_level="0" flagged_level_text="stable" />
      <p pageid="1629949" ns="0" title="Porta San Sebastiano" revid="64791898" stable_revid="61610797" pending_since="2009-09-15T16:19:32Z" flagged_level="0" flagged_level_text="stable" />
      <p pageid="2157354" ns="0" title="Entwicklungspolitik der Europäischen Union" revid="64640078" stable_revid="59929751" pending_since="2009-09-15T16:38:33Z" flagged_level="0" flagged_level_text="stable" />
      <p pageid="971904" ns="0" title="Federpendel" revid="65142775" stable_revid="59587441" pending_since="2009-09-15T17:37:29Z" flagged_level="0" flagged_level_text="stable" />
      <p pageid="3106812" ns="0" title="Soultzbach-les-Bains" revid="64552516" stable_revid="60455707" pending_since="2009-09-15T19:04:07Z" flagged_level="0" flagged_level_text="stable" />
      <p pageid="1223029" ns="0" title="VfR Bürstadt" revid="65150048" stable_revid="62925935" pending_since="2009-09-15T19:35:30Z" flagged_level="0" flagged_level_text="stable" />
      <p pageid="829158" ns="0" title="GSP" revid="64553869" stable_revid="62913440" pending_since="2009-09-15T19:38:46Z" flagged_level="0" flagged_level_text="stable" />
      <p pageid="3453867" ns="0" title="Agios Dimitrios" revid="65103799" stable_revid="64544222" pending_since="2009-09-15T19:47:10Z" flagged_level="0" flagged_level_text="stable" />
      <p pageid="2583263" ns="0" title="Jörg Kudlich" revid="64554475" stable_revid="62429967" pending_since="2009-09-15T20:03:24Z" flagged_level="0" flagged_level_text="stable" />
      <p pageid="325478" ns="0" title="Liste deutscher Komponisten klassischer Musik" revid="65089571" stable_revid="63582610" pending_since="2009-09-15T20:21:55Z" flagged_level="0" flagged_level_text="stable" />
    </oldreviewedpages>
  </query>
</api>

list=configuredpages

Enumerate all pages that have custom review configurations on non-protection configurations (ie. $wgFlaggedRevsProtection=false).

Parameters
  • cpstart – Start listing from this timestamp
  • cpend – Stop listing at this timestamp.
  • cpdir – In which direction to list.
  • cpnamespace – The namespaces to enumerate.
  • cpdefault – The default page view version.
  • cpautoreview – Review/autoreview restriction level.
  • cplimit – How many total pages to return.
Example
Enumerate all pages that have custom review configurations.
api.php?action=query&list=configuredpages&cpnamespace=0 [ApiSandbox에서 시도하기]
결과
<?xml version="1.0"?>
<api batchcomplete="">
  <continue cpstart="116" continue="-||" />
  <query>
    <configuredpages>
      <p pageid="14" ns="0" title="Aleksis Kivi" last_revid="23622851" stable_revid="23622851" stable_is_default="1" autoreview="" expiry="2026-10-17T15:17:09Z" />
      <p pageid="75" ns="0" title="Albert Einstein" last_revid="23633099" stable_revid="23633099" stable_is_default="1" autoreview="" expiry="2025-10-23T09:35:04Z" />
      <p pageid="100" ns="0" title="Buddhalaisuus" last_revid="23639747" stable_revid="23635003" stable_is_default="1" autoreview="" expiry="2026-04-23T11:23:58Z" />
    </configuredpages>
  </query>
</api>

prop=flagged

Use action=query&prop=flagged to get information about the flagging status of the given pages.

Limitations

  • Transclusions across wikis are not stabilized

Uninstalling

  1. Remove the require_once or wfLoadExtension line from LocalSettings.php
  2. Drop the tables in FlaggedRevs.sql
  3. Drop the columns page_ext_reviewed, page_ext_quality, and page_ext_stable, and the index ext_namespace_reviewed from the page table (if they exist; only older versions of FlaggedRevs used these)
  4. Run maintenance/refreshLinks.php from the command line to flush out the stable version links
  5. Run maintenance/rebuildFileCache.php 0 overwrite from the command line if you use $wgFileCache

Testing platforms

같이 보기

Copyrights

© Aaron Schulz, Joerg Baach, 2007

Retrieved from "https://www.mediawiki.org/w/index.php?title=Extension:FlaggedRevs/ko&oldid=8400377"